
C500N5C 500kW 1500rpm 50HZ Gas Generator Set
Description
Technical Parameters
C500N5C 500kW 1500rpm 50HZ Gas Generator Set
| Item | Parameter |
|---|---|
| Genset Model | C500N5C |
| Continuous Prime Power | 500 kWe / 625 kVA |
| Rated Speed | 1500 rpm |
| Frequency | 50Hz |
| Rated Voltage | 400V/230V,3‑phase‑4‑wire |
| Power Factor | 0.8 lag |
| ISO Electrical Efficiency | 38.6 % |
| ISO Thermal Efficiency | 47.2 % |
| Total Cogeneration Efficiency | 85.8 % |
| Fuel Type | Natural gas / biogas / coal‑bed methane;Methane Number MI≥60 |
| Gas supply pressure | 0.15‑0.25 bar |

Cummins C500N5C 500kW 50Hz gas generator set, lean-burn model, with CENSE electronic control and PowerCommand smart monitoring, compatible with natural gas, biogas, and coalbed methane, widely used in CHP combined heat and power and distributed power plants.
Engine QSK19‑G4 (inline 6-cylinder lean-burn gas engine) Cummins:
Configuration:6‑cylinder inline, 4‑stroke, water‑cooled, turbo‑aftercooled lean‑burn
Displacement:19.0 L
Bore × Stroke:159 mm × 159 mm
Compression ratio:13.5:1
Lubricating oil capacity:84 L
Starting system:24V electric starter & charging alternator
Emission:NOₓ 250‑500 mg/Nm³
Control:CENSE MCM Electronic control, closed-loop air-fuel ratio adjustment
synchronous generator
Brushless self‑excited alternator,PMG Permanent magnet excitation standard configuration
Insulation Class:Class H;Temperature rise:105℃
Built‑in stator & bearing RTD sensors,anti‑condensation heater
Strong short‑circuit withstand capability, support grid‑parallel & island operation
Intelligent Control System(PowerCommand®3.3)
Local multi‑language HMI display, parameter setting, fault log inquiry
Full‑range protection:low lube oil pressure, high coolant temp, overspeed, gas pressure fault, start failure, over‑voltage/under‑voltage, reverse‑power, over‑current
Paralleling function:multi‑units parallel, grid‑tied, island mode
Communication:Modbus‑RS485 / Ethernet;connect SCADA/BMS;remote monitoring & data recording, unattended operation
Open‑Type Open‑Frame Machine Dimensions & Weight
Dimension(L×W×H):4450 mm × 1780 mm × 2420 mm
Wet operating weight:9 250 kg
Note:The standard open frame does not include a radiator; it can be equipped with a remote radiator, container soundproof cabin, gas pressure regulating skid, SCR denitration, 4G remote gateway, and optional CE/GOST certification.
Typical Application
CHP combined heat‑power
Industrial prime power
Biogas /coal‑bed methane power generation
Grid‑parallel peak shaving
Commercial Remark
No public list price;price depends on configuration, certification, delivery term;inquire via Cummins authorized dealer.
Fuel requirement:MI≥60;not suitable for high‑impurity, low‑methane gas source.
FAQ:
Q: Do you sell gas generator sets as requested by customers?
Q: Who is responsible for the commissioning of generator sets?
Q: What about the after-sales service you provide?
Hot Tags: c500n5c 500kw 1500rpm 50hz gas generator set, China c500n5c 500kw 1500rpm 50hz gas generator set manufacturers, factory, gas engine generator set, gas generator set, C995N5C generator set, gas generator set with Intelligent monitoring system
Previous
No InformationSend Inquiry
You Might Also Like






