Genuine and Remanufacture Cummins Engin QSK60 for Belas Mining Car Truck

Products Description

 

Cummins-QSK60 (Cummins V16-60.2L High-Power Industrial Engine Full Specifications)

The QSK60 belongs to the top high-power model of the Cummins Q-Series, a V-type 16-cylinder four-stroke heavy-duty diesel engine, mainly produced at the Daventry plant in the UK, primarily used for ultra-high-power generator sets, mining equipment, auxiliary/main engines of ships, oilfield power, offshore platforms, and backup power for data centers.
 

Power Classification
1. Power Generation G‑Drive Version (Rated Speed 1500 rpm / 50Hz) Cummins
Prime = Continuous Power; Standby = Emergency Backup Power
QSK60‑G4: Continuous 1600 kW (2000 kVA) | Standby 1760 kW (2200 kVA)
QSK60‑G8: Continuous 1800 kW | Standby 2000 kW
QSK60‑G32: Continuous 1730 kW (2319 bhp)
QSK60‑G31: Continuous 1942 kW (2603 bhp)

Power Range Summary:
Continuous Power: 1280‑2250 kW
Standby Power: 1408‑2500 kW
Horsepower Range: 2000‑2700 hp (1491‑2013 kW) Cummins 

 

2. Industrial Drive and Marine Propulsion Versions
Continuous Operation: 1491‑2013 kW, suitable for ship propulsion, mining crushers, large air compressors

3. Core Technical Features
Integrated high-strength ductile iron cylinder block, one-piece cast iron pistons, nitrided cylinder liners, suitable for heavy continuous operation throughout the year; O-ring sealing structure reduces oil and water leakage failures Cummins.

Double-circuit cooling system (main cooling circuit + low-temperature after-cooling circuit), high temperature resistant, maximum ambient tolerance 50°C, suitable for desert and high-temperature mining sites Cummins MA... .

Full-flow double-layer bypass oil filtration, oil impurity filtration capacity is three times that of ordinary filters, extending overhaul intervals.

ECM electronic control supports single-cylinder data monitoring, fault recording, overload protection, remote monitoring; can interface with generator set controllers PowerCommand.

Emission Versions: Tier-2, Tier-4F, IMO-III marine emission certification, high-end models equipped with SCR urea after-treatment system Cummins.

4. Main Application Scenarios
Large container diesel generator sets, IDC data center standby power
Open-pit mining dump trucks, large crushing stations, fixed mining power
Main engines of ocean-going commercial ships, auxiliary engines of engineering ships, superyacht propulsion
Offshore oil and gas platforms, drilling equipment, large pumping stations, large welding power stations

5. Common Spare Part Numbers
Injector: 4955524
Crankshaft Position Sensor: 4921499
Oil Filter: LF9080
Fuel/Water Separator: FS1040