K19 QSK38 Diesel Engine Parts Cylinder Liner Oil Seal 3081489 O-Ring Seal For Construction Machinery
Description
Technical Parameters
|
Part Number: |
3081489 |
|
Part Name: |
SEAL,OIL |
|
Engine Model: |
K19&QSK38 |
| Dimensions: | 10cm*10cm*5.5cm |
| Weight: | 0.0382KG |
|
Minimum Package Qty: |
1 |
|
Package: |
Neutral |
Cummins Genuine Cylinder Liner Oil Seal 3081489 (for K19/QSK38 engine)

One Ring, Two Worlds
On a K19 or QSK38 engine, the cylinder liner separates two worlds.
On one side: combustion. Temperatures exceeding 2,000°C. Pressure spikes that would burst steel pipes. A violent, chemical storm of burning diesel, soot, and corrosive gases.
On the other side: coolant. Water mixed with glycol, circulating at pressure, carrying heat away from the metal. And engine oil, pressurised, flowing through galleries to lubricate the moving parts.
These two worlds must never meet. If coolant finds its way into the combustion chamber, the engine hydrolocks - pistons try to compress liquid, connecting rods bend, blocks crack. If combustion gases escape into the coolant, pressure builds, hoses burst, and the engine overheats. If oil leaks past the liner, it contaminates the coolant, destroys the water pump seal, and starts a cascade of failures.
The 3081489 is the firewall between these worlds. It's a simple O-ring. But it's engineered like nothing simple.
The Plasma Treatment - Not Just Coating, But Transformation
The surface of the seal receives a plasma nitriding treatment-1.
Plasma nitriding isn't a coating. It's a diffusion process - nitrogen atoms are driven into the surface of the material, changing its chemical structure from the outside in. The result is a surface that resists corrosion, wear, and chemical attack at a fundamental level.
Salt spray corrosion resistance: 2,000 hours (ASTM B117 standard)-1.
Two thousand hours of continuous salt spray exposure without corrosion. That's the kind of protection that matters on a marine engine, where saltwater mist finds its way into every crevice. Or on a mining haul truck, where the environment is dust and humidity and the engine runs 24/7.


Specifications
| Parameter | Value |
|---|---|
| Part Number | 3081489 |
| Component Type | Cylinder Liner Oil Seal / O-Ring |
| Material | FKM + PTFE multilayer composite-1 |
| Temperature Range | -30°C to +200°C-1 |
| Friction Coefficient | ≤0.1-1 |
| Abrasion Resistance | 3× standard nitrile rubber-1 |
| Corrosion Resistance | 2,000 hours salt spray (ASTM B117)-1 |
| Pressure Range | 0–25MPa (0–3,625 PSI)-1 |
| Thermal Deformation Compensation | Up to 0.03mm-1 |
| Seal Design | X-type groove + double lip + self-tightening spring-1 |
| Inner Diameter Tolerance | ±0.005mm-1 |
| Quantity per K19 Engine | 6 units-17 |
| Service Life | 8,000 hours (2× standard)-1 |
Where This Seal Works
Construction Machinery - KTA38 Dump Trucks
Adapted to the KTA38 engine in mining haul trucks-1. The operating environment is shock loads - frequent start-stop cycles, heavy loads, rough terrain. The seal resists frequent start-stop shock loads with a sealing life of 8,000 hours - twice that of ordinary oil seals-1.
In a mine, 8,000 hours is roughly two years of continuous operation. Two years without a liner seal failure. Two years without pulling the cylinder head.
Generator Sets - QSK38 Gensets
Used in QSK38 diesel generator sets-1. The seal reduces cooling efficiency decline caused by oil leakage, guaranteeing oil temperature stability at 90°C ±5°C under 98% load-1.
In a generator set, consistency is everything. Temperature fluctuations affect combustion efficiency, emissions, and power output. The 3081489 keeps the coolant clean and the oil where it belongs.
Marine Power - KTA38-M Marine Engines
Matched with the KTA38-M marine engine-1. The seal is IP68 certified - waterproof and dustproof-1. IP68 means continuous immersion in water beyond 1 metre without ingress. On a vessel, that matters.
The seal adapts to wet and salt spray corrosive environments on deck-1. Two thousand hours of salt spray resistance isn't a lab number - it's a guarantee that the seal won't corrode and fail in the middle of a voyage.

Hot Tags: k19 qsk38 diesel engine parts cylinder liner oil seal 3081489 o-ring seal for construction machinery, China k19 qsk38 diesel engine parts cylinder liner oil seal 3081489 o-ring seal for construction machinery manufacturers, factory, 3934046, 4327234, engine spare parts, engine exhaust pipe, carburetor, engine belt
Product descriptions from the supplier
|
Part Number: |
3081489 |
|
Part Name: |
SEAL,OIL |
|
Engine Model: |
K19&QSK38 |
| Dimensions: | 10cm*10cm*5.5cm |
| Weight: | 0.0382KG |
|
Minimum Package Qty: |
1 |
|
Package: |
Neutral |
Send Inquiry
You Might Also Like






