Precautions For Using Diesel Generator Set Starter

Nov 07, 2023

Leave a message

The starter of a diesel generator set plays an indispensable role in the generator set, but do you know what precautions to take during operation?

1. The continuous working time of diesel generator set should not exceed 10 seconds each time it starts, and the time between two starts should be more than 2 minutes. Prevent the armature coil from overheating and burning out. If it cannot be successfully initiated three times, the cause should be identified before initiating.

2. When the driving gear rotates at high speed and cannot mesh with the ring gear, the start button of the generator should be sensitively released. After the engine stops working, a second start should be carried out to prevent damage caused by collision between the driving gear and the flywheel ring gear.

3. When using diesel generator sets in cold areas, antifreeze oil should be replaced; When initiating, use a long handle screwdriver to pull the flywheel ring gear at the flywheel inspection hole for a few weeks before initiating.

4. After the diesel generator set is started, the start button should be sensitively released. Return the drive gear to its original position.

5. During normal operation of the generator set, stop pressing the generator set start button again.

6. Lubricating grease should be regularly added to the front and back cover bushings of the starter to prevent dry contact and damage to the shaft and bushings.

Send Inquiry